Ayurvedic & Herbal Toothpaste Manufacturing Plant , Ayurvedic & Herbal Toothpaste , Cream , Paste Mixer
Toothpaste making plant with main mixer with powder transfer systems , contra mixer with special different type liquid intergrading transfer thru PLC , Auto valve and all vessels shall be mixing with scabbard, continues mixing , Inline transfer , lobe pump , screw pump , working plat form , railing systems , load cell base main mixer to transfer accurate powder and herbal , special liquid etcs.
We make customized systems with solutions as per customer requirement .
Ayurvedic & Herbal toothpaste manufacturing plant consists of the main manufacturing vessels, also known as Contra Mixing with Powder transfer systems with intergrading auto transfer systems with pipe line, transfer pump , Auto valves systems, working plat form, PLC base control Panel The mixing plant is highly versatile and mostly used for manufacturing Toothpaste, Creams, Cosmetics, and other viscous products. to know the toothpaste manufacturing plant.
The Mixing Assembly consists of series of paddle type blades of appropriate shape to move the material back towards the center of the container. The paddle type blades are provided on the central shaft which runs through a hollow shaft on which other sets of blades are welded. Both the sets of blades intermesh with each other and rotates in a clockwise and anti-clockwise direction respectively and one sets also scraps the container wall for thorough and uniform mixing of the material.
The mixer is so designed to withstand high vacuum applied during the process for optimum mixing. Contra Mixer is provided with a jacket for cooling or heating as per the application. The vessel shall have a shell of suitable thickness with a hemispherical bottom and flanged top dish made out of S.S. 316 plate. The vessel shall be jacketed with MS jacket ( SS304 jacket provided on extra cost on demand, if required ) of suitable with stiffeners suitable for the steam pressure of 4 to 5 Kg/cm2. The jacket shall be insulated with 50 mm thick glass wool insulation and shall be cladded with 16 SWG M.S. or SS304 material. The vessel shall be suitable for 600 to 700 mm of Hg vacuum and an internal pressure of 3 Kgs / cm2.
The top lid of the Mixer m/c shall be provided with hydraulic lifting and lowering arrangement if required. Hydraulic arrangement will consist of: ( Optional at extra cost )
Homogenizer with shearing-intensive “homogenizing” mode or “pumping” mode with low shearing effect, simply achieved by the change in direction of rotation and special geometry.
Agitator and scraper systems with vertical and horizontal mixing effect for shortest heating and cooling time.
Batch size minimum 1 kg to maximum 10kg
COSMETICS & PERSONAL CARE :